| |
| The
TIIGER puller delivers 50,120 lbs. of lift at 2,800 psi input
pressure from a lightweight 57 lb. cylinder (with oil and couplings). |
Pole
Puller Model 4001D
|
Specifications:
|
| Safety
factor on all our manufactured parts is 3 1/2:1 |
| Cylinder
is rated at 50,120 lbs. of lift at 2,800 psi input and is the
lightest cylinder available |
| Unique
pre-tensioning system for more efficient pulling |
| Hydraulic
cylinder is physically tested to two times the rated input pressure.
This means our cylinders are tested to 5,600 psi. |
| Internal
reliefs prevent exploding or imploding if a cylinder fails to
couple |
| Cylinder
has a 16" stroke length |
| Pulls
poles that are cut lower to the ground (14-16") |
| We can
use lighter 1/2" alloy chain and still avoid chain failure
due to the unique design of the swivel chain hook attachment |
| All
three pins, as well as the chain hook casting, are moade of
the strongest commmercial stainless metal we can buy (160,000
psi yield point) |
Model
4001D includes:
 57
lb. cylinder
25
lb. base plate
36
lb. swivel chain hook assembly
Lightweight
1/2" alloy chain -- 6' @ 15 lbs. |
Additional
features include:
Low
center of gravity and low chain hook-up keeps the base plate
from kicking out.
Unique
swivel hook assembly pretensions the chain, giving maximum lift
per stroke.
Swivel
hook assembly reduces loading on the chain, allowing for use
of a lighter, 1/2" alloy chain.
Run
it off your truck or add an optional, compact hydraulic pump
for those hard-to-reach areas. |
TIIGER, INC. • W53 N568 Highland Dr., Cedarburg, WI 53012
Fax: (262) 375-8116 • Phone: (262) 375-7435
|
